首頁 > 認識驗證 > Safety Certification

Safety Certification

AnTek Certification Inc. established a safety engineering department that provides a safety test laboratory for professional research and testing of product safety standards. Since its foundation in 2004, the safety engineering department has been dedicated to providing professional testing and certification service for our customers. Professional competence of the engineers and the testing capacities and instruments of the lab are improved continuously to obtain various lab accreditations, such as:

1. Passing IECEE's CB accreditation (CBTL)

2. Passing strict JET accreditation and obtaining TDAS certificate. Now, we can carry out PSE-certificated tests and make applications directly in our lab, providing more efficient and convenient Japanese certification services (diamond PSE, circle PSE & S-Mark)

3. Taiwan TAF accreditation Lab and BSMI designated lab

4. UL/CAP AA

5. CSA/ NEMKO / DEMKO / SEMKO / FIMKO / TÜV Rheinland/ TÜV SUD

6. VDE

 

We are now an established and publicly recognized professional safety certification lab in Taiwan and provide following services:

1. IT, Audio

2. Medical products

3. Batteries

4. Lamps (traditional and LED)

5. LED drivers

6. Plugs, sockets, and switches

7. Global energy saving requirements and tests

 

 

In addition to research on the technique standards of different countries, we are care about the development tendency of the techniques in the future.

We are very familiar with the administrative laws and regulations as well as the processes of application for certification markings. We have offices or subsidiaries in Japan, Korea, China, Singapore, Thailand, Australia, India, and Mexico, and cooperate with international testing laboratories to obtain markings and certificates for our customers rapidly.

 

Service is the core of our operating philosophy. We provide a complete technical advisory platform to reduce the "failure cost" that may occur at the initial stage of the certification. What are involved in such cost include the safety or production advisory service for initial development of customer's products and testing stage of samples. We also provide customers with advisory service of safety certification after the project is completed (including Initial Production Inspection (IPI), safety knowledge, service charge/annual fee, Variation Notice (VN) and so on.)

 

The following are the product types and standards that we focus on.

 

IEC/EN 61558-1+
IEC/EN 1558-2-16

Switch mode power supply units and transformers for switch mode power supply units

Power supply

Switching power supply

IEC/EN 61558-1+
IEC/EN 61558-2-7

Transformers and power supplies for toys

Transformer or power supply

Toy transformer or power supply

IEC/EN 62384

DC or AC supplied electronic control gear for LED modules — Performance requirements

lamp product

LED module - AC/DC electronic controller

IEC/EN 60335-1+
IEC/EN 60335-2-29

Battery chargers

Battery charger

Battery charger equipment

UL 2089

Vehicle Battery Adapters

Vehicle charger

Vehicle charger

UL 153

Portable Electric Luminaires

Portable lamp

Portable lamp

UL 1598

Luminaires

Lamp

Fixed lamp

UL 8750

Standard for Light Emitting Diode (LED) Equipment for Use in Lighting Products

LED lamp driver

LED lamp

IEC/EN 62133

Secondary cells and batteries containing alkaline or other non-acid electrolytes-Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications

Battery, cell products

Chargeable/non-chargeable battery, cell

UN38.3

Lithium metal and lithium ion batteries

Battery, cell products

Chargeable battery, cell

O-PSE

Lithium ion batteries

Battery products

Chargeable battery

JIS C8714:2007

Safety tests for portable lithium ion secondary cells and batteries for use in portable electronic applications

Secondary battery, cell products

Chargeable battery, cell

JIS C8712:2006

Safety requirements for portable sealed secondary cells, and batteries made from them, for use in portable applications

Sealed small secondary battery, cell products

Chargeable battery, cell

GB/T 18287

General specification of lithium-ion battery for cellular phone

Lithium-ion battery for cellular phones

Chargeable battery

YD 1268:2003

The safety specification and test method for lithium batteries and charger

Lithium battery and charger for portable hand-held  communication devices

Chargeable battery, charger

IEC/EN 61960:2004 (7.2.1, 7.2.2, 7.2.3)

Secondary cells and batteries containing alkaline or other non-acid electrolytes-Secondary lithium cells and batteries for portable applications

Secondary battery, cell products

Chargeable/non-chargeable battery, cell

IEC/EN60669

Switches for household and

similar fixed-electrical installation-

Common requirements for household switches and
similar fixed-installation switches

 

IEC/EN61058-1

Switches for appliances. General requirements

Safety standards for switches of appliances

 

IEC60884-1

Plugs and socket-outlets

for household and similar purposes-

Standards for household plugs and sockets and similar applications

 

EN50075

Specification for flat non-wirable two-pole plugs 2.5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes

Specifications for non-wire two-pole plugs 2.5A 250V with soft cords for connection of Class-II equipment for household and similar applications

 

BS1363

13 A plugs, socket-outlets, adaptors and connection units. Specification for rewirable and non-rewirable 13 A fused plugs

British standard  13 A  plug, socket, adapter and connector test specifications

 

AS/NZS3112

Approval and test specification—Plugs and socket-outlets

Australian and New Zealand plug and socket test standards